• Home /
  • Amalfi Room Darkening

Amalfi Room Darkening Vertical Blinds

Find Kirsch Dealers
Amalfi Room Darkening

Material Content:

Part Number:

Customize your room design by choosing the colors in your room below:

Wall color
 
Change
Floor color
 
Change
Trim color
 
Change

Available Fabric Colors

Select choices below to add free color swatches to your cart

Kirsch Vertical Blinds offer elegant beauty with total light and privacy control. With over 200 luxurious colors and patterns in updated collections they give you ultimate versatility. Achieve the look you want to fit any window - even hard-to-dress large windows and sliding doors. Exclusive features make them easy to use, easy to install, and easy to maintain. Their unique pairing of sophisticated style and innovative design makes Kirsch Vertical Blinds the ideal choice for your home.

Vane Options

Curved

Fabric

S-Shaped

Control Options

BackStacker®

With traditional vertical blinds, the vanes stack in front of the window, blocking your view. With Kirsch exclusive BackStacker®, the vanes stack neatly on the outer edge of the window, preserving the view and enhancing the enjoyment of the natural scenery. BackStacker® extends the life of your vertical blinds by reducing pull on the draw cord. You will achieve optimum functionality with one way stack, dual stack and reverse stack options. BackStacker® is not available with center stack option or cordless wand control.

Cordless Wand

Eliminates cord and chain from view and improves safety. Wand traverses and rotates vanes.

 

 

 

 

 

 

 

Left Stack Controls

Left Stack. For corded operation, controls on left.

Right Draw Controls

Right Stack. For corded operation, controls on right.

Dual Stack Controls

Controls on left or right.

Center Stack Controls

For corded operation, controls on left or right. For Wand Control, wand on left and right. Not available with BackStacker®.

Valance Options

DesignLine™ Valance - Tailored Wrap

Standard on each blind at no charge. Valance color coordinates to vane color.

 

DesignLine™ Valance - Round Wrap

Standard on each blind at no charge. Valance color coordinates to vane color.

 

Traditional Valance

Valance frame available in four color options. Valance insert color coordinates to vane color.

White

White - 67171

Off White

Off White - 67172

 

 

 

 

Warm Grey

Warm Grey - 67173

Chocolate Brown

Chocolate Brown - 67175

 

 

 

 

Transitional Valance

Valance frame available in four color options. Valance insert color coordinates to vane color.

White

White - 67271

Off White

Off White - 67272

 

 

 

 

Warm Grey

Warm Grey - 67273

Chocolate Brown

Chocolate Brown - 67275

 

 

 

 

Resemblance™ Faux Wood Valance

Coordinates with Kirsch Custom Wood Blinds 2" Resemblance™ Faux Wood Collection.

White

White - 67110

Sand

Sand - 67403

Blond

Blond - 67502

Chocolate

Chocolate - 67504

 

 

Rich Pine

Rich Pine - 67505

Royal Oak

Royal Oak - 67500

Toasted Pecan

Toasted Pecan - 67501

Vineyard

Vineyard - 67503

How to Install

Print Instructions

Before you begin your installation:

Read all installation instructions!

• Make sure that you have all tools and hardware needed for installation.

• Check the installation surface (wall, ceiling, or window frame) to ensure that you have suitable fasteners and tools for the material.

• Double check the headrail and shade for proper width and length. If you are installing several sets of shades, be sure to match them with the appropriate window.

• Check the parts list shipped with the product to confirm that you have the correct number of brackets.

Recommended Tools

• Phillips head screwdriver

• Pencil

• Level

• Tape measure

• Safety glasses

• Drill/drill bits (1/16" drill bit may be used to pre-drill for screws)

• 1/4" Wrench (if using extension brackets)

• Hex nutdriver (optional for mounting screws)

• Drywall anchors

Step 1
Included Mounting Hardware

 

Outside Mount Bracket

Inside Mount Bracket

Headrail with vane carrier

Optional Brackets

 

Extension Brackets

(Offers clearance for obstructions) Outside-mounting extension brackets will provide 1"–3" clearance between the headrail and mounting surface. Assemble extension bracket as shown.

Step 1A
Mark the bracket locations— outside-mount installation

• Position one bracket at each end of the headrail, 3" in from the ends.

• Space any remaining brackets evenly, not more than 30" apart.

• Mark the bracket mounting hole locations at the desired height, making sure they are level and square. Allow at least 1/2" clearance for vanes above the floor or sill.

Step 2A
Install the brackets— outside-mount installation

 

If mounting into drywall or plaster, use 3/16" drill bit and insert wall anchors before inserting screws.

Example: Installation on a wood window frame using the included screws.

Step 1B
Mark the bracket locations— inside-mount installation

 

• Position one bracket at each end of the headrail, 3" in from the ends.

• Space any remaining brackets evenly, not more than 30" apart.

• Mark the bracket locations, making sure they are in a straight line that is parallel to the wall.

Determining the correct distance from the wall or window:

Position the center of the brackets a min. 2 1/2" in front of the window frame or any protruding trim or handles.

Step 2B
Install the brackets— inside-mount installation

 

Install in a wood window frame using the included screws.

For models equipped with a valance, the valance mounting clips should be installed to the headrail at this time. Please refer to the installation instructions included with your valance before proceeding

Step 3
Attach the headrail— outside- or inside-mount

 

NOTE: For wide windows and sliding glass doors, two people are recommended for installing the headrail.

With the bracket positioned as shown, fit the top front lip of the headrail into the front part of the spring clip.

Tip the back of the headrail up into the spring clip until it locks with a clicking sound.

Step 4
Center the vane rotation

 

Models With Wand

• Attach the wand.

• Rotate the wand so that the vane clips are at a right angle to the window.

Models With Vane-Rotation Chains

Adjust the vanerotation chain so that it is centered (ends of chain should be even). Vane clips should be at a right angle to the window (open position).

Step 5
Attach the vanes

 

Starting at one end, align the rectangular hole in the vane with the clip.

Slide the vane fully into the clip; then pull down slightly to lock the hook on the clip into place. Repeat for the remaining vanes, making sure that all vanes are facing in the same direction.

Left - Vanes nest correctly for optimum light control.

Right - Vanes nest incorrectly, preventing optimum light control.

Bottom Chains (if ordered)

Connect the vanes together with the included clips and chain.

Step 6
Attach the tension device (cord/chain control only)

 

Refer to instructions in the hold-down tension device.

Step 7
Test the vane rotation

 

Turn the wand or pull the bead chain in alternate directions to ensure that the vanes rotate smoothly in both directions.

Step 8
Test the traverse

 

With the vanes in the open position (vanes at a right angle to the window), slide the wand or pull the cord in alternate directions to ensure that the vanes move smoothly in both directions.

Please refer to the valance instructions for your valance style at this time to complete your installation.

How to Measure

Print Instructions
Measure For Inside Mounting

Measuring For Inside Mount Blinds

  • Step 1

    Find Width

    Measure the opening across the top, where the headrail is to be installed, from inside of window frame on left to inside of window frame on right. Round the measurement down to the nearest 1/8". A minimum depth of 2 1/2" is needed to install inside the window.

  • Step 2

    Find Height

    Measure from the inside top of the opening on the left, at the center, and on the right to the sill; to the closest 1/8" and note the smallest dimension.

    Do not make any allowances: adjustments will automatically be made so the headrail will fit the opening properly and the vanes will clear the sill by 1/4" to 1/2".

     

     

     

 

 

Measure For Outside Mounting

Measuring For Outside Mount Blinds

  • Step 1

    Find Width

    Measure the width of the area to be covered at the place where the headrail will be installed to the nearest 1/8". Blind should overlap opening at least 4" on each side to ensure privacy. To maintain maximum view, allow adequate overlap and consider the stack width.

  • Step 2

    Find Height

    Measure the height of the area to be covered and round down to the nearest 1/8". Blind should extend at least 3" above and 3" below opening or window moulding.

    For installations to the floor, deduct 1/2" from the shortest height for proper clearance.

    Specifying outside mount measurement means the factory makes allowances for headrail deductions only.

    Notes
    1. Blinds installed on windows near wall or baseboard heaters must clear the heaters by 12" above and 6" to the side.
    2. Make sure there are no obstructions on either side of the window that may prevent you from ordering a wider blind.
    3. Measure the area to the left and right of each window from the frame to the nearest obstruction (e.g. corner, fireplace, corner window, bookcases).

 

 

Measure For Inside Mounting

Measuring For Patio Doors

  • Step 1

    Find Width

    Measure the width of the area to be covered at the place where the headrail will be installed to the nearest 1/8". Blind should overlap opening at least 4" on each side to ensure privacy. To ensure easy access through the door and allow adequate overlap, consider the stack width.

  • Step 2

    Find Height

    Measure the height of the area to be covered at the left, center, and right and round down to the nearest 1/8". Blind should extend at least 3" above opening or window moulding.

    To ensure easy access through the door and allow adequate overlap, consider the stack width.

    For installations to the floor, deduct 1/2" from the shortest height for proper clearance.

    Specifying outside mount measurement means the factory makes allowances for headrail deductions only.

 

 

Vane Count and Stacking Chart

  
  One Way Dual Draw
Blind Width No. of Vanes Stack Width Clear Opening No. of Vanes Stack Width Clear Opening
13-1/8" 4 3-7/8" 9-1/4" -- -- --
16-1/4" 5 4-1/8" 12-1/8" -- -- --
19-3/8" 6 4-1/2" 15" -- -- --
22-1/2" 7 4-3/4" 17-3/4" -- -- --
25-5/8" 8 5-1/8" 20-1/2" 8 3-7/8" 18"
28-3/4" 9 5-1/2" 23-1/4" -- -- --
31-7/8" 10 5-3/4" 26" 10 4-1/8" 23-5/8"
35" 11 6-1/8" 28-7/8" -- -- --
38-1/8" 12 6-1/2" 31-5/8" 12 4-1/2" 29"
41-1/4" 13 6-3/4" 34-1/2" -- -- --
44-3/8" 14 7-1/8" 37-1/4" 14 4-3/4" 34-3/4"
47-1/2" 15 7-1/2" 40" -- -- --
50-5/8" 16 7-3/4" 42-3/4" 16 5-1/4" 40-3/8"
53-3/4" 17 8-1/8" 45-5/8" -- -- --
56-7/8" 18 8-1/2" 48-3/8" 18 5-1/2" 46"
60" 19 8-3/4" 51-1/4" -- -- --
63-1/8" 20 9-1/8" 54" 20 5-3/4" 51-1/2"
66-1/4" 21 9-3/8" 56-7/8" -- -- --
69-3/8" 22 9-3/4" 59-5/8" 22 6-1/8" 57"
72-1/2" 23 10-1/8" 62-3/8" -- -- --
75-5/8" 24 10-3/8" 65-1/4" 24 6-1/2" 62-3/4"
78-3/4" 25 10-3/4" 68" -- -- --
81-7/8" 26 11-1/8" 70-3/4" 26 6-3/4" 68-1/4"
85" 27 11-3/8" 73-1/2" -- -- --
88-1/8" 28 11-3/4" 76-3/8" 28 7-1/8" 74"
91-1/4" 29 12-1/8" 79-1/8" -- -- --
94-3/8" 30 12-3/8" 82" 30 7-1/2" 79-1/2"
97-1/2" 31 12-3/4" 84-3/4" -- -- --
100-5/8" 32 13" 87-5/8" 32 7-3/4" 85-1/8"
103-3/4" 33 13-3/8" 90-1/4" -- -- --
106-7/8" 34 13-3/4" 93" 34 8" 90-5/8"
110" 35 14" 96" -- -- --
113-1/8" 36 14-3/8" 98-3/4" 36 8-1/2" 96-1/4"
116-1/4" 37 14-3/4" 101-1/2" -- -- --
119-3/8" 38 15" 104-3/8" 38 8-3/4" 101-7/8"
122-1/2" 39 15-3/8" 107-1/8" -- -- --
125-5/8" 40 15-3/4" 110" 40 9-1/8" 107-3/8"
128-3/4" 41 16" 112-3/4" -- -- --
131-7/8" 42 16-3/8" 115-1/2" 42 9-3/8" 113"
135" 43 16-3/4" 118-1/2" -- -- --
138-1/8" 44 17" 121" 44 9-3/4" 118-5/8"
141-1/4" 45 17-3/8" 123-7/8" -- -- --
144-3/8" 46 17-5/8" 126-1/2" 46 10" 124-1/4"
147-1/2" 47 18" 129-1/2" -- -- --
150-5/8" 48 18-3/8" 132-1/4" 48 10-3/8" 129-3/4"
153-3/4" 49 18-5/8" 135-1/8" -- -- --
156-7/8" 50 19" 138" 50 10-3/4" 135-3/8"
160" 51 19-3/8" 140-5/8" -- -- --
163-1/8" 52 19-5/8" 143-1/2" 52 11-1/8" 141"
166-1/4" 53 20" 146-1/4" -- -- --
169-3/8" 54 20-3/8" 149" 54 11-1/2" 146-1/2"
172-1/2" 55 20-5/8" 151-7/8" -- -- --
175-5/8" 56 21" 154-3/4" 56 11-3/4" 152-1/8"
178-3/4" 57 21-1/4" 157-1/2" -- -- --
181-7/8" 58 21-5/8" 160-1/4" 58 12-1/8" 157-1/2"
185" 59 22" 163" -- -- --
188-3/8" 60 22-1/4" 165-7/8" 60 12-3/8" 163-3/8"