FAQ

Search FAQs

How do I change from a one-way to a two-way draw?

To convert a two-way draw to a one-way draw With rod face down, pull rod sections apart, free cord from underlap master and slide master off.

Cord and Stack on right: Reconnect rod sections, then unscrew metal arm on master and move over one hole to the right. Open plastic end gates and move slides to the left rod section.

Cord and stack on left: Unscrew metal arm on master and reverse direction (pointing to the left). Pull master off rod section and move slides to the right rod section.

Place master back into rod and reconnect rod sections.

Pull all excess cord through to the left side.

Back to FAQs>>