Cleaning and Care | Stacking Chart
Factory Deductions
| Inside Mount | Outside Mount | |
|---|---|---|
| Headrail | -1/2" | -1/4" |
| Slat | -1/2" | 0" |
| Valance | 0" | +1" |
Size Limitations
| Inside Mount (IM) | Outside Mount (OM) | |||
|---|---|---|---|---|
| Minimum Width | Maximum Width | Minimum Width | Maximum Width | |
| Tilt and Lift Controls - Opposite Side | 10 1/4" | 96 1/2" | 10" | 96" |
| Tilt Control in Center; No Lift Control | 9 1/2" | 10 1/4" | 9 1/4" | 10" |
| No Tilt and Lift Controls; Slats in Open Position | 6 7/8" | 9 1/2" | 6 5/8" | 9 1/4" |
Recomended Cleaning Methods
Routine Maintenance
Periodic dusting will keep the shade looking clean and new. You can clean the blind hanging in place or you can take it down. By tilting the slats down, but not quite closed, you will be able to clean most of the top surface of each slat.
Periodically wipe blinds with a soft cloth, a dusting mitt, or a soft, lightly dampened cloth.
Do not use solvents or abrasive solutions to clean the blind. This will cause damage to the blind which is not covered under warranty.
You may also periodically wipe blinds with the brush attachment from a vacuum cleaner.
Stacking Chart
| Blind Height | 36" | 42" | 48" | 54" | 60" | 66" | 72" | 84" | 96" | 108" | 120" |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Stack Height | 2 1/2" | 2 5/8" | 2 7/8" | 3" | 3 1/8" | 3 3/8" | 3 1/2" | 3 7/8" | 4 1/4" | 4 5/8" | 4 7/8" |
Ladder and Cord Count Chart
| Blind Width Inside Mount | Blind Width Outside Mount | Number of Ladders | Number of Cords |
|---|---|---|---|
| 10 1/2" to 19 1/2" | 10" to 19" | 2 | 2 |
| 19 5/8" to 33 1/2" | 19 1/8" to 33" | 3 | 2 |
| 33 5/8" to 45 1/2" | 33 1/8" to 45" | 4 | 4 |
| 45 5/8" to 57 1/2" | 45 1/8" to 57" | 5 | 3 |
| 57 5/8" to 69 1/2" | 57 1/8" to 69" | 6 | 4 |
| 69 5/8" to 81 1/2" | 69 1/8" to 81" | 7 | 4 |
| 81 5/8" to 93 1/2" | 81 1/8" to 93" | 8 | 4 |