Features
Ambiance™ Sheers with Room Darkening from Kirsch combine the function of vertical blinds with the beauty of sophisticated draperies, giving you total light and privacy control. Enhance any room's décor with a variety of decorative valances and fabric facings in always-chic neutrals or bold contemporary colors. The inspired balance of innovation and elegance make Ambiance™ Sheers with Room Darkening the ultimate all-in-one window covering solution.
Light Control & Privacy Options
Light Filtering
Fabrics softly filter natural light when vanes are open.
Room Darkening
Vanes block light and provide complete privacy when closed.
Other Window Options
Cordless Wand Control
Cordless Wand Control eliminates dangling cords and chains, providing safe and smooth operation.
BackStacker®
Complete with BackStacker®, Kirsch Soft Verticals emulate the flow of a drapery when traversed by stacking vanes at the far side of the window to allow for a sheer, clean look that will not obstruct your view.
Left Stack Controls
Left Stack. For corded operation, controls on left
Right Stack Controls
Right Stack. For corded operation, controls on right.
Dual Stack Controls
Controls on left or right
Center Stack Controls
For corded operation, controls on left or right. For Wand Control, wand on left and right. Not available with BackStacker®.
Valance Options
Estate™ Valance
If the look of draperies is your aim, achieve that high-end style by upgrading to a decorative wood Estate™ Valance. The Estate™ Valance option completely conceals the headrail and operating system while adding gorgeous architectural detail. Complement any setting from contemporary to traditional with 10 designer finials and coordinating end caps available in five of our most popular finishes. Available on outside mount shades only.
Fabric Valance
For a more finished, tailored appearance add a stunning fabric valance to match your Ambiance™ Shades. This sophisticated valance choice will cover the headrail and operating system while creating a softer, more unified style from floor to ceiling.
Channel Valance
Standard on all Ambiance™ Shades. The channel valance is color coordinated to your fabric selection for a clean, modern look.
Measuring For Inside Mount Sheers
-
Step 1
Find Width
Measure the opening across the top where the headrail is to
be installed from inside of window frame on left to inside of
window frame on right. Round the measurement down to the nearest
1/8". A minimum depth of 2 7/8" is needed to install inside the
window.
-
Step 2
Find Height
Measure from the inside top of the opening on the left, at
the center, and on the right to the sill; round the measurement
down to the nearest 1/8" and note the smallest dimension. Do not
make any allowances: the factory will make all adjustments so the
headrail will fit the opening properly and the vanes will clear
the sill by 1/4" to 1/2".
| Minimum Mounting Depth* |
| Minimum Depth to Install |
2 7/8" |
| Flush Mount Headrail |
3 1/2" |
| Flush Mount Vanes and Fabric Folds (Pleats) |
6 1/4" |
| Flush Mount Channel Valance |
4 1/8" |
| Flush Mount Fabric Wrap Valance |
5 1/2" |
|
NOTE: Estate Valance not available inside
mount.
*Minimum mounting depth is the depth required, in
the window frame, for the blind to be mounted inside mount.
|
Measuring For Outside Mount Sheers
-
Step 1
Find Width
Measure the width of the area to be covered at the place
where the headrail will be installed to the nearest 1/8". Blind
should overlap opening at least 4" on each side to ensure privacy.
To maintain the maximum view, allow adequate overlap and consider
the stack width.
-
Step 2
Find Height
Measure the height of the area to be covered and round down
to the nearest 1/8". Blind should extend at least 3" above and 3"
below opening or window moulding. For ceiling-to-floor
installations, make adequate allowance for carpeting. Specifying
outside mount measurement means the factory makes no allowances.
| Notes |
| Blinds installed on windows near wall or baseboard
heaters must clear the heaters by 12" above and 6" to the side |
Measuring For Patio Doors
-
Step 1
Find Width
Measure the width of the area to be covered at the place
where the headrail will be installed to the nearest 1/8". Blind
should overlap opening at least 4" on each side to ensure privacy.
To ensure easy access through the door and allow adequate overlap,
consider the stack width. To calculate stack dimensions, consult
the Vane Count and Stack Size Chart.
-
Step 2
Find Height
Measure the height of the area to be covered and round down
to the nearest 1/8". Blind should extend at least 3" above opening
or window moulding. For ceiling-to-floor installations, deduct
1/2" for proper clearance. Specifying Outside Mount measurement
means the factory makes no allowances.
Vane Count and
Stacking Chart
To Use This Chart: Use the appropriate column for One Way or
Split Draw blinds. Find the width that you need to clear under the
column marked "Clear Opening." Order the blind size listed at the far
left. Split Draw blinds must have an even number of vanes.
| |
One Way Stack |
Dual Stack |
| Blind Width |
No. of Vanes |
Stack Width |
Clear Opening |
No. of Vanes |
Stack Width |
Clear Opening |
| 13-1/8" |
4 |
3-7/8" |
9-1/4" |
-- |
-- |
-- |
| 16-1/4" |
5 |
4-1/8" |
12-1/8" |
-- |
-- |
-- |
| 19-3/8" |
6 |
4-1/2" |
15" |
-- |
-- |
-- |
| 22-1/2" |
7 |
4-3/4" |
17-3/4" |
-- |
-- |
-- |
| 25-5/8" |
8 |
5-1/8" |
20-1/2" |
8 |
3-7/8" |
18" |
| 28-3/4" |
9 |
5-1/2" |
23-1/4" |
-- |
-- |
-- |
| 31-7/8" |
10 |
5-3/4" |
26" |
10 |
4-1/8" |
23-5/8" |
| 35" |
11 |
6-1/8" |
28-7/8" |
-- |
-- |
-- |
| 38-1/8" |
12 |
6-1/2" |
31-5/8" |
12 |
4-1/2" |
29" |
| 41-1/4" |
13 |
6-3/4" |
34-1/2" |
-- |
-- |
-- |
| 44-3/8" |
14 |
7-1/8" |
37-1/4" |
14 |
4-3/4" |
34-3/4" |
| 47-1/2" |
15 |
7-1/2" |
40" |
-- |
-- |
-- |
| 50-5/8" |
16 |
7-3/4" |
42-3/4" |
16 |
5-1/4" |
40-3/8" |
| 53-3/4" |
17 |
8-1/8" |
45-5/8" |
-- |
-- |
-- |
| 56-7/8" |
18 |
8-1/2" |
48-3/8" |
18 |
5-1/2" |
46" |
| 60" |
19 |
8-3/4" |
51-1/4" |
-- |
-- |
-- |
| 63-1/8" |
20 |
9-1/8" |
54" |
20 |
5-3/4" |
51-1/2" |
| 66-1/4" |
21 |
9-3/8" |
56-7/8" |
-- |
-- |
-- |
| 69-3/8" |
22 |
9-3/4" |
59-5/8" |
22 |
6-1/8" |
57" |
| 72-1/2" |
23 |
10-1/8" |
62-3/8" |
-- |
-- |
-- |
| 75-5/8" |
24 |
10-3/8" |
65-1/4" |
24 |
6-1/2" |
62-3/4" |
| 78-3/4" |
25 |
10-3/4" |
68" |
-- |
-- |
-- |
| 81-7/8" |
26 |
11-1/8" |
70-3/4" |
26 |
6-3/4" |
68-1/4" |
| 85" |
27 |
11-3/8" |
73-1/2" |
-- |
-- |
-- |
| 88-1/8" |
28 |
11-3/4" |
76-3/8" |
28 |
7-1/8" |
74" |
| 91-1/4" |
29 |
12-1/8" |
79-1/8" |
-- |
-- |
-- |
| 94-3/8" |
30 |
12-3/8" |
82" |
30 |
7-1/2" |
79-1/2" |
| 97-1/2" |
31 |
12-3/4" |
84-3/4" |
-- |
-- |
-- |
| 100-5/8" |
32 |
13" |
87-5/8" |
32 |
7-3/4" |
85-1/8" |
| 103-3/4" |
33 |
13-3/8" |
90-1/4" |
-- |
-- |
-- |
| 106-7/8" |
34 |
13-3/4" |
93" |
34 |
8" |
90-5/8" |
| 110" |
35 |
14" |
96" |
-- |
-- |
-- |
| 113-1/8" |
36 |
14-3/8" |
98-3/4" |
36 |
8-1/2" |
96-1/4" |
| 116-1/4" |
37 |
14-3/4" |
101-1/2" |
-- |
-- |
-- |
| 119-3/8" |
38 |
15" |
104-3/8" |
38 |
8-3/4" |
101-7/8" |
| 122-1/2" |
39 |
15-3/8" |
107-1/8" |
-- |
-- |
-- |
| 125-5/8" |
40 |
15-3/4" |
110" |
40 |
9-1/8" |
107-3/8" |
| 128-3/4" |
41 |
16" |
112-3/4" |
-- |
-- |
-- |
| 131-7/8" |
42 |
16-3/8" |
115-1/2" |
42 |
9-3/8" |
113" |
| 135" |
43 |
16-3/4" |
118-1/2" |
-- |
-- |
-- |
| 138-1/8" |
44 |
17" |
121" |
44 |
9-3/4" |
118-5/8" |
| 141-1/4" |
45 |
17-3/8" |
123-7/8" |
-- |
-- |
-- |
| 144" |
46 |
17-5/8" |
126-1/2" |
46 |
10" |
124-1/4" |
