Enter your address to locate the nearest Kirsch Dealer.
Customize your room design by choosing the colors in your room below:
Select choices below to add free color swatches to your cart
For a Best for Kids certified product, make sure to select cordless control type.
Perfect for French doors or windows with limited depth.
Available in Select Hardwood Blinds.
Most popular slat size. Ideal for most standard windows.
Available in Select Hardwood Blinds, Variance™, Resemblance™ and Classique™ Value.
Offers grandest view. Ideal for large or deep windows.
Available in Select Hardwood Blinds, Variance™, and Resemblance™.
The design of our Cordless control creates a clean profile across all of your windows and makes it easy to lift and lower your blinds without dangling cords.
Not available on 1" Hardwood or Classique™ Value.
Kirsch Wood Blinds come standard with corded control.
This innovative option features a no-route hole design to eliminate light gaps and provide tighter slat closure, resulting in greater light and privacy control.
Not available on 1" Hardwood or blinds with decorative tapes.
Personalize wood blinds with our exclusive decorative tapes—available in two widths and in a variety of coordinating colors and patterns. Not available with Privacy.
Tapes available by slat size.
Accent a window treatment with a beautiful valance and tassel complement. Select from two standard options that are tailored to reflect personal style and décor.
Marked by clean, simple lines for a sleek profile.
Available for 2" and 2-1/2" Hardwood, Variance™ and Resemblance.™
Features an elegant, timeless design with details reminiscent of fine molding.
Kirsch introduces the Classique™ Value complement, a price-conscious design in today's most popular finishes with classic styling.
Available in select 2" finishes for Hardwood, Variance™ and Resemblance.™
Kirsch cornices add a distinctive and finished touch to your windows, a look that states it is your own. Based on your personal style, select from a more traditional Rope design or the modern Dentil offering.
Keep your Kirsch wood and faux wood blinds looking their best by periodically wiping them with a soft cloth, a dusting mitt, or the brush attachment from a vacuum cleaner.
You can clean the blind hanging in place or you can take it down.
By tilting the slats down, but not quite closed, you’ll be able to clean most of the top surface of each slat.
Do not use water, solvents, or abrasive solutions to clean the blind. This will cause damage to the blind which is not covered under warranty.
Premium Hardwood Blinds: In very dusty environments, you may use a non-wax furniture polish to clean the blind.
Variance and Visions™ Faux Wood Blinds: You may use a soft, lightly dampened cloth to clean your faux and composite wood blinds.
Blinds with Privacy: Slats can be removed for cleaning. Slide out the slat, wipe clean, and return to its original position. With the tighter closure of Privacy, any slight warpage could be noticeable; simply flip the slat over to cover the light gap.
Read all installation instructions!
• Make sure that you have all tools and hardware needed
• Check the installation surface (wall, ceiling, or
window frame) to ensure that you have suitable fasteners and tools
for the material.
• Double check the headrail and shade for proper width
and length. If you are installing several sets of shades, be sure
to match them with the appropriate window.
• Check the parts list shipped with the product to
confirm that you have the correct number of brackets.
• Phillips head screwdriver
• Tape measure
• Safety glasses
• Drill/drill bits (1/16" drill bit may be used to
pre-drill for screws)
• 1/4" Wrench (if using extension brackets)
• Hex nutdriver (optional for mounting screws)
• Drywall anchors
There are two types of brackets used for real and faux wood
blinds installation. Bracket appearance and quantity may vary
depending on size and headrail length.
Always use two mounting screws per bracket.
Box bracket (one used at each end)
Center support bracket (spaced evenly between ends)
Preparing box brackets for installation:
• Open the front of the bracket by lifting while
pressing on the bottom of the bracket to release the locking tab.
If your blinds include optional extension brackets or
spacers, you will need to use them to determine mounting hole
locations in Steps 3 and 4.
Align the holes in the box bracket with the desired set of
small holes in the extension bracket, as shown, and temporarily
attach the brackets together using two self-tapping screws per
bracket. Use the installation screws shipped with your blinds and
#8 drywall anchors (not included) to attach the extension brackets
to the wall before final installation of the box bracket to the
NOTE: If the width of the slats on your blinds is
greater than 2", then the plastic spacer must be used as shown to
allow for clearance between the blinds and the window. Blinds with
slats wider than 2" will not function properly without the spacer.
• Position the box brackets at each end of the headrail.
• Position the center support bracket (if included) in
the center, if using only one. If more than one center support
bracket is included, space them evenly along the headrail. Make
sure they will not interfere with the cord mechanism.
• Use a spirit level to check for levelness. and mark
the bracket mounting hole locations, two per bracket, making sure
they are square and equally spaced.
• Continue to step 4A.
• Position the box brackets at each end of the headrail.
Depending on the installation location, box brackets can be
attached using the top, back, or the side holes.
• Mark the location of the desired bracket mounting
holes, two per bracket, making sure they are square and equally
• Continue to step 4B.
Example: Installation in drywall using #8 drywall anchors and
the included screws. Use two screws per bracket. Continue to step
Example: Installation in a wood window frame using the
Use two screws per bracket. Drill pilot holes
using a 1/16" drill bit.
Depending on the installation location, box brackets can be
attached using the top, back, or side holes.
• Align the headrail, tilt mechanism facing out, with
• Slide it straight back into the brackets.
• If the headrail can slide from side to side in the box
brackets, use a flat-head screwdriver to bend out the tabs on the
ends of the headrail until it is snug.
• Remove the binding from the blinds.
• Lower the front of each box bracket and press until
the locking tab clicks into place.
• Pull up the sleeve (on some models) on the tilt
• Clip the end of the wand onto the tilt mechanism, and
pull down the sleeve on the tilt mechanism.
• Rotate the tilt wand in each direction to ensure
NOTE: Some styles may have the hold-down pins
built into the bottom rail.
• Mark the center of the bottom rail.
• Drill 1⁄8" diameter by 1⁄2" deep starter
hole to prevent chipping.
• Tap the hold-down pin into the drilled hole.
• With the hold-down brackets attached to the bottom
rail, lower the blinds to the hold-down bracket mounting surface
and mark the bracket locations.
• Attach the hold-down brackets at the bottom of the
window with the included screws, as shown for your installation
• Slip the hold-down pin into the hole in the bracket.
Your valance may be attached to the headrail by a variety of
methods. If you received velcro, simply align the valance to the
headrail and apply pressure.If you received plastic clips, follow
the instructions below.
• Center the valance on the headrail and use the slots
on the bottom of the headrail as a guide to mark the location for
the valance clips. Valance installation requires a minimum of two
NOTE: The number of valance clips may not equal
the number of slots in the headrail. Space the provided clips
evenly over existing slots. If only two valance clips are
provided, use the slots at the each end of the headrail.
• Insert the clips into the groove on the back side of
the valance and then rotate the clip 90°, so that the end of
the clip marked “TOP” points up.
For outside mounts:
• Insert return clips as far as they will go into each
end of the valance.
• Fit the returns onto the return clips.
• Align the clips with the slots on the bottom of the
headrail and clip into place.
NOTE: For optional cornice installation, see
separate instructions shipped with the product.
The blind has been preset and is ready for use. If desired, you are able to easily adjust to loosen or tighten the tension, making lifting and lowering your blind
lighter or heavier depending on your preference.
This adjustment can be done by simply adjusting the headrail with a Phillips head screwdriver. Rotate to the right to tighten and left to lossen a half-turn at a time
to reach desired tension. A reminder is located next to the adjustment screw. We recommend not removing this sticker in order to reference for future use.
To position Safety Cord-Stops:
1 Install blind as directed by manufacturer, making sure headrail is securely fastened. Lower blind to maximum desired length and lock into place.
2 Measure the distance from headrail to cord-stops. If cord-stops are 1 to 2 inches below the headrail, no further adjustment is needed. Your blinds are
ready to use
3 If cord-stops ARE NOT 1 to 2 inches below headrail, loosen (but do not untie) the knot surrounding the cord-stop.
4 Push the cord-stop and the loosened knot toward the headrail until the cord-stop is 1 to 2 inches below the headrail.
Measure exact distance to the nearest 1/8" between inside
surfaces of window frame at the top, middle, and bottom, and use
the narrowest width. Do not make any width deductions. Factory
will make the appropriate deductions.
Measure exact distance to the nearest 1/8" from inside
surface at top of window to sill at the left, middle and right and
use the longest height. If you prefer blind not to touch sill,
deduct 1/4". If there is no sill, measure height to point where
blind is to reach.
Measure exact distance to the nearest 1/8" between the
outermost points where the blind is to be placed. For optimum
light control, this measurement should extend 3/4" beyond the
window opening on each side (or 1 1/2" for the entire width).
Measure exact distance to the nearest 1/8" from where top of
blind will be located to top of sill. If there is no sill or if
blind is to overlap window frame, measure to point blind is to
Kirsch extends a limited lifetime warranty on the enclosed product to the original residential retail purchaser only if the product was properly installed and remains in the original window.
The product is covered against manufacturing defects (i. e., a flaw in the product design, materials or workmanship that causes the product to no longer function) and has a limited lifetime warranty. Lifetime warranty extends for the life of the product as defined by category below:
Normal wear and tear
Any product that fails due to:
Any product that, with the passage of time, exhibits:
Natural material (including, but not limited to wood, grass, jute, reeds) products that have:
Costs associated with:
In the event there are multiple blinds/shades in the same room, only the defective blind/shade will be replaced.
If damage occurred during shipping, call 1-800-538-6567 and report within 14 calendar days of delivery or you may be denied credit for your damaged product.
For online product-specific trouble shooting information, refer to www.Kirsch.com.
If you suspect this Kirsch product has a manufacturing defect in materials or workmanship:
Any unauthorized returns will not be accepted.
THIS SHALL BE YOUR SOLE REMEDY UNDER THIS LIMITED WARRANTY.
If this Kirsch product is found to have a manufacturing defect in materials or workmanship, we will (at our discretion) do one of the following:
Colors vary from lot to lot and may not exactly match sample swatch or previous purchases
Discontinued items or color selections will be replaced with the closest equivalent current product
This limited lifetime warranty gives you specific legal rights, and you may have other rights, which vary from state to state/province to province. Some states/provinces do not allow limitations on how long a warranty lasts, so the above limitations may not apply to you.
No agent, representative, dealer, or unauthorized employee has the authority to increase or alter the obligation of this warranty. This limited lifetime warranty supersedes any previous versions.
© 2017 Kirsch. All Rights Reserved.